MOBOTIX M25
mx10-13-229-89 General Event Settings
Activity
Value
Explanation
Arming
Enabled
Off
CS1
CS2
CS3
CS4
CS5
CSL
From Master
Arming
:
Arming for Recording and Action Groups:
Enabled
: activate all.
Off
: deactivate all.
SI
: arming controlled by signal input.
CS
: arming controlled by custom signal as defined below.
From Master
: copies Main Event Arming state from master camera.
Note:
Configuring arming sources as
From Master
requires you to properly configure and enable
Master/Slave
below.
(No time table)
Weekdays_Mo-Fr
Weekend_Sa-So
Opening_Times
Closing_Times
MyCustomTimes
Time Table Profile
:
Time table profile for time-controlled arming (
Time Tables
).
Custom Signals
Value
Explanation
Custom Signal 1 (CS1)
Off
On
Time Table
From Master
By Action
By Illumination
Source
:
Specify how to generate custom signal
CS1
.
Off
: set to
false
.
On
: set to
true
.
Signal Input
: derive from signal input.
Time Table
: derive from time table.
From Master
: copy
CS1
from the master camera.
By Action
: control state via action groups.
By Illumination
: derive from illumination value.
<Selection not available>
Weekdays_Mo-Fr
Weekend_Sa-So
Opening_Times
Closing_Times
MyCustomTimes
Time Table
:
Select the time table to use as input to
CS1
.
Trigger Level
:
Enter the illumination in lux. The precision is one decimal digit.
Higher than
Lower than
Comparison
:
Select the signal condition.
Delay
:
Delay for state changes in seconds [0..300].
Note:
Configuring arming sources as
From Master
requires you to properly configure and enable
Master/Slave
below.
Master/Slave
Value
Explanation
Master/Slave
Enable Master/Slave
:
Specify whether or not this camera supports the processing of signals imported from a master camera and whether or not slave cameras are allowed to log in and to fetch local camera signals.
Master Camera
:
Camera to fetch remote signals from. Only relevant if you specified
From Master
at least once as source to arming controls (camera main arming, recording, actions, messaging) or to custom signals (
CS1
,
CS2
,
CSL
).
Replication Protocol Port
:
IP port used by the network protocol that replicates master camera signals among a set of slave cameras.